How to Install (IPTV.SH) on ENIGMA 2

Step 1: Get Your Device IP Address

Navigate to: Settings > Setup > System Network Device > Setup Adapter > Settings

Get your IP address - it starts with 192.168...

Step 2: Download PuTTY Software

Go to your Windows PC and download PuTTY software from the official website.

Step 3: Open PuTTY

Launch the PuTTY application on your computer.

Step 4: Add Your Device IP Address

Enter the IP address of your ENIGMA 2 device in PuTTY.

Step 5: Set Port Number

Add Port 23 in the port field.

Step 6: Connect to Device

Click on Open to establish the connection.

Step 7: Login

Your default login and password are: root

Step 8: Copy Your Installation Line

Copy your line (you will get it after you order your subscription):

Step 9: Execute the Command

RIGHT-CLICK MOUSE BUTTON to paste your line, then press ENTER

Step 10: Reboot Your Device

Type reboot and your device will restart.

What You Need for an Enigma2 Installation

Enigma2 is the Linux operating system used by Dreambox, VU+, Zgemma, Octagon and Formuler receivers. Unlike a Firestick or a Smart TV, it has no app store — your IPTV line is installed over the network as a single command. Have four things ready before you begin: a receiver already connected to the internet, its local IP address, a computer on the same network, and the installation line our team sends you after activation.

The line is permanent for the lifetime of your subscription. Keep it somewhere safe, because you will paste the same line again if you re-flash the box or change image.

Which Images and Boxes This Guide Covers

The same steps work on every current Enigma2 image: OpenPLi, OpenATV, OpenViX, VTi, BlackHole, OpenBH and OpenSPA, on both Python 2 and Python 3 builds. We install 8K IPTV lines daily on VU+ (Solo, Duo, Uno, Ultimo), Zgemma (H, HS, H2, H7, i55), Dreambox (DM500, DM800, DM900, DM920), Octagon SF8008, Formuler F1 and F4, and AB Combo receivers.

This is not the MAG method. MAG and Ministra boxes use a portal URL rather than a terminal command, so if you have a MAG, follow the setup guide for MAG boxes instead. The line we send contains both formats, so you are covered either way — just tell our team which box you have.

No PuTTY? Use the Terminal You Already Have

PuTTY is only a terminal client, so the steps are identical with any SSH or Telnet tool. On macOS or Linux, open Terminal and connect with telnet 192.168.x.x. On Windows 10 and 11 you can skip the download entirely and use the built-in OpenSSH client with ssh root@192.168.x.x. Newer images ship with Telnet turned off, in which case connect over SSH on port 22 and everything else stays the same.

Common Enigma2 Problems and Fixes

Connection timed out or refused: the receiver's IP address has changed, or Telnet is disabled on your image. Check the current address in Menu > Information > Network, then try port 22 instead of port 23.

Login rejected: older images use root with no password at all. If you set a password, the terminal asks for it and stops showing characters as you type — that is normal, not a hang. If root login is blocked, enable it from the receiver's web interface first.

Nothing happens after pasting: pasting in PuTTY is a right-click, not Ctrl+V, and a left-click does nothing at all. If your line arrived as a screenshot, retype it rather than pasting the image.

No channels after the reboot: confirm the box still has internet access, then restart the interface from Menu > Standby / Restart > Restart GUI. If the bouquet is still empty, run the same installation command again — nothing breaks by repeating it.

Buffering and freezing: one Enigma2 stream needs roughly 10 Mbps for HD and 25 Mbps for 4K. A receiver on Wi-Fi is the most common cause, so a wired connection settles most of these complaints.

Renewing or Moving the Line to a New Box

When your subscription is renewed the command does not change — simply run it again on the same receiver. Each line is bound to your MAC address, which you can find in Menu > Information > About or on the label underneath the box. Moving to a new receiver means sending us that new MAC address so the line can be transferred to it, and the change is applied immediately.